Port Mirroring and SPAN for Network Traffic Analysis

Network+ · Network Troubleshooting · By Super Admin

Learn how port mirroring, SPAN, and RSPAN enable network traffic analysis on switched networks for troubleshooting and security monitoring purposes.

Traffic Analysis Challenges in Switched Networks

Port mirroring, also called Switch Port Analyzer (SPAN) and Remote SPAN, allows you to sniff traffic on a network when using a switch. A typical switch will read the forward/filter table and send traffic only out the destination port, which is the whole idea of using a switch. However, a problem with this arises when you need to sniff traffic on the network.

<img src="/question_assets/Network+/sg_c11f029.png" alt="An illustration shows that a typical switch will read the forward or filter table and send traffic only to the destination port of host A to B, forwarding frames to the switches."/>

<figcaption>Switches send frames out the destination port only.</figcaption>

The image above illustrates this issue; the sniffer isn't seeing data coming from Host A to Host B. To solve this little snag, you can temporarily place a hub between Host A and Host B. This method will allow you to see the frames sent from Host A to Host B. The bad news, however, is that by doing this, you'll bring down the network temporarily.

Implementing Port Mirroring Solutions

The port-mirroring option allows you to place a port in span mode so that every frame from Host A is captured by both Host B and the sniffer. This would also be a helpful option to take advantage of if you were connecting an IDS or IPS to the switch as well.

<img src="/question_assets/Network+/sg_c11f031.png" alt="An illustration shows the mirroring option to place a port in span mode so that every frame from host A is captured by both host B and the sniffer."/>

<figcaption>Port spanning/mirroring</figcaption>

The illustration above demonstrates how port spanning/mirroring enables simultaneous traffic capture without network disruption. Be careful when using port mirroring because it can cause a lot of overhead on the switch and possibly crash your network. Because of this, it's a really good idea to use this feature at strategic times, and only for short periods if possible.

Remote SPAN for Distributed Monitoring

RSPAN extends SPAN by enabling remote monitoring of multiple switches across your network. The traffic for each RSPAN session is carried over a user-specified RSPAN VLAN, which is dedicated for a specific RSPAN session in all participating switches. This capability allows network administrators to monitor traffic across distributed network segments without physically accessing each switch location.

The RSPAN functionality provides centralized visibility into network traffic patterns across multiple switches, making it particularly valuable for large-scale network environments. By dedicating a specific VLAN to RSPAN traffic, the monitoring data remains isolated from production traffic while still providing comprehensive visibility across the network infrastructure.

0.0 (0 ratings)

Discussion (0)

No discussion on this article yet — be the first to comment.

Please sign in to join the discussion.

Port Mirroring and SPAN for Network Traffic Analysis | SecViva